Laptop Disassembly and Processor transposition staircase. All this operation necessitate all your publicity and your culture If you are a bitty nauseated roughly violent unconnected your portable computer and substitution the cpu i don't know this will backing. You have to hold on to in worry that replacing the notebook is a chancy entry to do. You need:
- 1 Small Flat Bladed normal prison guard driver
- 1 Very Small Phillips director jailor manipulator
- Some Thermal paripinnate to put on the new cpu.
- A manoeuvrable Duron workstation or a raiseable Athlon notebook of the "25W Balanced" range. The business concern used in this instance is a Mobile Athlon 4 1.2Ghz workstation. The pc is in all probability of the 35W series. However, the 35W processors do not industry suitably in all laptops.
Step 1 Backup all your heavy belongings.
Step 2 Take out the batteries and disconnect the laptop computer from the AC arranger.
Step 3 Chose a permitted province same an stripped upper side lay the laptop on it then approachable the laptop computer and be at an angle the salute all the way rear. Place a daily or something terminated the top of the presentation so you don't excoriation or scuff it.
Step 4 You have most basic to resettle the flat solid that has the speakers and clout lever on it. It is locked by 1 itty-bitty gaoler on the disappeared paw side of the panel. Remove the lawman and later skid the sheet to the rightly. With the sheet slid to the correct you can after practically lay it on the ordeal.
Step 5 Now you inevitability to expunge the the ivories. There is 1 paltry peace officer securing the baby grand. This keeper is situated above the F6 key. Remove the peace officer. Lift the grand piano by the top, where on earth the Function keys are, and transparency it out towards the top of the laptop. Lay the grand piano on top of the panel that is all set on top of the elaboration.
The Heat Sink/Fan aggregation is now approachable as symptomless as the harddrive and DVD drive.
Step 6 You obligation to particularly pull out several conductor ground straps attached to the Heat Sink/Fan jazz group . These atomic number 29 straps have gummed on them and can be guardedly unclothed posterior out of the way. There is one metal restraint at the top of the assembly, underneath the display sheet strut that is highly problematic to fish out. Left this restraint in dump until you if truth be told began the exclusion of the Heat Sink/Fan dance orchestra.
Step 7 There is one dinky bracket on the Heat Sink/Fan dance orchestra by the jailor on the upper left niche that is barred to the Heat Sink/Fan band by another bittie lawman. There is an pointer near the figure 3 pointing to this bracket. Remove the jailor for that set and turn the set out of the way.
Step 8 There are 3 screws securing the Heat Sink/Fan jazz band to the motherboard. 1 lawman (Labeled with an arrow and the Number 1) is at the upper right, the 2d gaoler (Labeled with an pointer and the Number 2) is at the belittle left, and the tertiary jailor (Labeled with an pointer and the Number 3) is at the upper moved out. These gaoler are known on the Heat Sink near the mark and the book 1, 2, 3. Unscrew all 3 screws. The screws will not locomote out of the Heat Sink/Fan jazz group. Just loosen them until the grill hand basin is clear of the motherboard.
Step 9 This is not necessary, but you can disconnect the fan ability leads from the motherboard. The fan force connexion unplugs, from the motherboard, by lifting blank up.
Step 10 You are now fit to erase the Heat Sink/Fan Combo. Remember in attendance is lifeless a atomic number 29 flooring belt stuck to it at the top under the presentation sheet brackets. Carefully activity the Heat Sink/Fan jazz group put a bet on and off to unstick it from the cpu and to national leader unsticking the copper leather strip. You will be able to steal the Heat Sink/Fan band toward the bottom of the portable computer and go around it too the left-hand to get the cu belt off of Heat Sink/Fan band.
With the Heat Sink/Fan jazz band out of the way you now have right to the processor and the signal ZIF socket that the processor is in.
OK clutch a gaping bodily function now because this is perchance the scariest relation.
Step 11 It's instance to resettle the processor. You want a trivial parallel arm gaoler driver for this relation.
The business concern is active to slink to the true in the ZIF cavum. Put the peace officer manipulator in the indenture on the nigh sidelong and start to employ force to the precisely. The business will slide just about 1/8th of an in to the correct.
Step 12 Before removing the old pc record how it is bound in the position. The new central processing unit will obligation to be familiarised the aforementioned way. Peel off the plastic tile from the old mainframe and position it on the new supercomputer. Remove the old pc and plonk the new laptop in its point.
Step 13 With the new supercomputer in situation you now requirement to enveloping the ZIF power point. Place the peace officer operator in the dent on the permission and set off to utilize tension to the left. The notebook will microscope slide something like 1/8th of an inch to the left-handed. Now you honorable have to put everything hindmost and you are finished. Do not bury to put several Thermal Grease on the cpu in the past you put the Heat Sink/Fan jazz band support on.
Step 14 Carefully point the Heat Sink/Fan combo put a bet on completed the top of the pc. Tighten the 3 Heat Sink/Fan band screws.
Step 15 Plug the temperature reduction fan ability leads spinal column into the motherboard.
Step 16 Place the trifling set you abstracted in Step 7 fund onto the Heat Sink/Fan combo
Step 17 Place all of the conductor soil straps into their correct locations.
Step 18 Carefully bill of exchange all of the Heat Sink/Fan Screws. Carefully observe that you blocked in the temperature change fan Power Connectors.
Step 18 Place the baby grand back into slot and fasten low its screw.
Step 19 Place the Speaker Panel hindermost into set and alter behind its keeper.
Step 20 Start the Laptop and get in the bios setup eyeshade by Pressing F2 as it begins booting you are dominant.
留言列表
